Chargers
We offer battery charging systems for the complete range of motive power solutions.
Track | Charger HF Premium
HOPPECKE Batteries is the largest producer of industry battery systems in European ownership. Since 1927, the family company has been developing and producing in Germany, and thanks to its leading research and development activities, it has all reliable and innovative storage technologies in its product portfolio.
Belatron
The best technology for your charging station.
For over four decades now, BELATRON has been associated with advanced and pioneering charging technology.
BELATRON high-efficiency charging systems have an efficiency factor up to 96% and operate using a regulated charging curve in order to prevent overcharging and undercharging due to fluctuations in the mains supply voltage.
BELATRON high-efficiency charging systems have an efficiency factor up to 96% and operate using a regulated charging curve in order to prevent overcharging and undercharging due to fluctuations in the mains supply voltage.
The charging units can be configured for use with both (E) PzS and (E) PzB as well as AGM traction batteries. All relevant charging characteristics are stored in the internal memory of the unit.
The high-frequency technology of the power unit allows the BELATRON high-efficiency charging systems to be installed in compact and functional wall-mounted casings. Higher capacity power units can be stationed in free-standing cases.
Tebetron
The new Tebetron generation works with a modern, efficient charging characteristic in which the gassing phase (necessary to fully charge the battery) has been optimised. This optimisation shortens the gassing phase and reduce the amount of gas produced. This saves electrical energy and reduces the amount of water consumed by the battery every time it is charged.
Reducing the amount of electrical energy required for charging not only reduces operating costs but also reduces CO2 emissions. Every kilowatt hour saved makes a contribution to climate protection.
Reduced water consumption extends the battery maintenance interval further minimising operating costs.
Tebetron chargers can be used for all PzS and PzS-B wet-cell batteries. The charging times range from 7.5 – 14 hours and are determined by the choice of rated current. These units are suitable for shift operation, i.e. for charging times of 7.5 – 9 hours.
After formation of the company in 1938 the business was repairing electrical systems and machines. From the machine repair business todays electrical-machine-services has developed that is one of Europe’s leading service centers for all types of electrical machines. Since 2012 BENNING is manufacturing BENNING LIONIC® energy systems based on lithium iron phosphate technology for materials handling industry to be used in Electrical driven Forklift and Warehousing Equipment.
ENERGY PULSE
Benefits of pulse charging technology:
- Reduced water consumption due to low temperature rise.
- Reduced battery maintenance and improved battery lifetime.
- The low charge factor leads to a significant reduction of costs.
MICRO HF
The Nuova Elettra Micro HFE charger has been designed after many years or research and development.
This charger is built to the highest standards of design, manufacture, quality control and customer service.
Micro HFE incorporates the latest High Frequency technology and provides the following benefits:
- The very high efficiency—more than 85%—compared to 60% of standard taper chargers, leads to a significant reduction of costs, because less energy is consumed for each charge.
- Reduced weight and volume.
- Reduced charging time leads to reduced electricity bills, reduced water consumption.
- Reduced battery maintenance and improved battery life.
- Recharge profile not influenced by Mains fluctuation or depth of discharge.
MICRO SW2B SW4B SW6B
The Nuova Elettra Micro SW2B, SW4B, SW6B chargers provide the following benefits:
- The very high efficiency (more than 85%) compared to taper chargers, leads to a significant reduction of costs, because less energy is consumed for each charge.
- Reduced weight and volume.
- Blind side of the charger to avoid that objects eventually placed on top could obstruct the ventilation slots.
- Removable cap casing for checking the charger without removing it from the wall.
- Reduced charging time leads to reduced electricity bills, reduced water consumption, reduced battery maintenance and improved battery life.
- Recharge profile not influenced by power grid fluctuation or depth of discharge.
- Air flows horizontally.
- Electronic components are located away from the main air flow to prevent damage, corrosion and contamination.
- Temperature increases only 15° when charger is working @ max power: INCREASED LIFETIME.
RTM2 RPM2
The RTM2 / RPM2 charger is available as 400/230V, 50/60 Hz, three phase input model and 230V, 50/60 Hz, single phase input model. The unit is suited to the recharging needs of lead acid traction batteries.
QuiQ 1000
1000W Industrial Battery Charger
The QuiQ 1000 is a highly durable on- or off-board charging solution that operates on any single-phase grid worldwide with a 93% peak efficiency. The charger can store 10 lab-validated charge profiles for specific brands or amp-hour ranges of lead acid and lithium motive battery packs, to assist customers in achieving battery charging flexibility. Applications include aerial work platforms, floor care machines, lift trucks, motorcycles, scooters, and utility vehicles.
Delta-Q IC650
650 W Industrial Battery Charger
Capable of charging lead acid (wet, AGM, gel) and lithium battery chemistries, the IC650 Charger is available in on- and off-board configurations. Optional CAN bus communication ensures seamless machine integration and AC/DC cabling is completely customizable. Applications include: scissor lifts, lift trucks, floor care machines, and golf cars.
Delta-Q IC900
900 W Industrial Battery Charger
Capable of charging lead acid (wet, AGM, gel) and lithium battery chemistries, the IC900 Charger is available in on- and off-board configurations. Optional CAN bus communication ensures seamless machine integration and AC/DC cabling is completely customizable. Applications include boom lifts, lift trucks, floor care machines, specialty golf vehicles, utility vehicles, motorcycles, and scooters.
Delta-Q IC1200
1200 W Industrial Battery Charger
Capable of charging lead acid (wet, AGM, gel) and lithium battery chemistries, the IC1200 Charger is available in on- and off-board configurations. Optional CAN bus communication ensures seamless machine integration and AC/DC cabling is completely customizable. Applications include aerial work platforms, lift trucks, floor care machines, utility vehicles, and motorcycles.
FLEXIS
Multi-functional Battery Charger
Programmable, high-frequency modular charger of traction batteries.
FORTIS
Traction Battery Charger
Download Brochure
